Power Utility Test & Measure Equipments
Test & Measure ...
 

RELAY TESTER Model RTS-50
 
FEATURES :
  • Test outputs to 50A AC, 250V AC and 240V DC.
  • Auxiliary out put to 240 V AC
  • Panel with clear easy to follow legend. Metal cabinet with carrying handles.
  • Built in Timer system., with facility to measure “pick up” and “drop out” time.
  • Automatic protection against current overload.
  • Digital readout of time, ampere and volt.
 
SPECIFICATIONS:
INPUT 240 Volts AC, ± 10% , 50 / 60 Hz.
OUTPUT A) CURRENT OUTPUT:
  1) 0 - 50 Ampere   @ 20 Volt
  2) 0 - 25 Ampere   @  40 Volt
  3) 0 - 2.5 Ampere  @  150 Volt
  4) 0 -  1   Ampere  @  250 Volt 
  Power : 1000 VA.
  Each of these outputs has a separate terminal referred to one common terminal.
  B) VOLTAGE OUTPUT :
  1) 0-240 Volt  DC/ 1Amp continuously adjustable. (This is not a floating output)
  2) 0-240 Volt  AC/ 1Amp, continuously adjustable. (This is fully floating output)
  Each of these outputs has a separate pair of terminals.
DUTY CYCLE 20 minutes ON/20 minutes OF
METERING Current / Voltage : 3 1/2 Digit 12 mm LED.
  Accuracy : ± 1% of rdg. ± 3 digits.
  a) 0-2A a c ( for output 0-1A/250V ac; resolution   0.001 A)  
b) 0-50A a c ( for output 0-2.5A, 0-25A and 0-50A ac; resolution  0.1 A)  
c) 0-250V d c  
d) 0-250V a c.
  2) Voltage : Reads outputs B in volts. Accuracy : 0.5% of rdg. ± 3digits.
TIMER 4 Digit, 12mm LED, with crystal time base.
  Auto ranging from 0.0001 to 9999 seconds. Accuracy: ± 0.3%. 
TIMER CONTROL  CIRCUITS The  timer  automatically starts when current output is initiated and stops automatically when the device under test operates.
  Test Conditions :
  Contact : NC / NO Contact.
AUTO-CUT-OFF Cuts off current output on operation of item.
ACCESSORIES (a) Operating  Manual with circuit diagram.
  (b) 3 Core 2 meter  long Main Cord
  (c) 3 meter long  50 Amp test lead pair.
  (d) 3 meter long Voltage AC / DC  test leads pair.