Navigate Electrical Troubleshooting For Your Facility

When a technician fixes a complicated piece of equipment, it gives them immense satisfaction. Having a good plan for resolving problems and following them can help you feel this way. Here is a troubleshooting process to help you determine what is wrong with your facility’s electricity using hi-pot testing equipment.

Gather Information

The first step in fixing a problem with an electrical system is to find out as much as possible about the issue. Instead of diving right in and trying anything to get the equipment to work, take a step back and find out how the equipment is supposed to work, if there is technical documentation for the equipment, and if there is anyone familiar with similar equipment who may have had the same problem.

Understand the Malfunction 

To understand the problem, you have to know how or what the process is and what part of the process is not working right. Knowing how the equipment and technique are supposed to work makes it easier to figure out what is not working right. Using hi-pot testing equipment will make it easy to determine the problem.

Figure Out What Parameters Need To Be Looked At

To determine which parameters need to be checked, you must know the difference between them and what signals affect the suspected component. After you have done the first three steps, it is time to take the measurements and make the observations you need to find the broken part. Ensure that all safety rules are followed when doing any test.

 Identify The Source Of The Problem

To find the source of the problem, the technician has to separate the parts and look at the parameters of the circuit. If the course is complicated, the technician must separate the components by group and use the recorded data to find the not working part.

A current profile comparison between two similar machines using hi-pot testing equipment can be used to confirm a possible anomaly and figure out how bad it is. 

Verify The Repair After Completion

Once the problem has been fixed, turn on the system to ensure it works as it should. This is important because there could be other problems. A circuit could cause a fuse to blow. If this is the case, you will need to do more troubleshooting.

Perform Root Cause Analysis

Since one of the goals of troubleshooting is to make sure the problem does not come back, it is essential to find out what went wrong and fix it so that it does not come back.

As you start troubleshooting, it may seem like a whole process takes longer. However, it will save time in the long run if you can separate fundamental parts of the process with hi-pot testing equipment. If fixing the problem gets too hard, ask for help. Sometimes a new set of eyes can help you find what you miss faster. Even if your goal is to bring in service from outside, following your troubleshooting plan will speed up the process because you will be able to give the people you hire detailed information.

Leave a Reply

STILL NOT SURE WHAT TO DO?

We are glad that you preferred to contact us. Please fill our short form and one of our friendly team members will contact you back.

    X
    CONTACT US